PREVENT BACKFLOW WITH WASTOP IN SWEDEN

Flood protection
Location: 
Västervik, Sweden
Customer: 
Västervik Miljö & Energi
Problem: 

After a meeting with Västervik Miljö & Energi, the body in charge of the municipality’s water and sewer services, an inspection of the municipality’s overflow system was carried out. The purpose of the inspection was to identify which overflow outlets needed to have a check valve installed as a preventive measure in order to stop backflow into the pipes which can occur, for example, at high water levels. 

One of the overflow outlets that needed to have a check valve installed was a DN1200 concrete pipe leading to an upstream overflow chamber. Two separate pipes lead to the overflow chamber: one for rainwater and one for wastewater with a separating wall in between them. In order to protect the wastewater pipe from overload, wastewater is able to flow over the separating wall and out through the emergency overflow.

However, if water levels are high, this function will make it possible for sea water to flow back through the emergency overflow, thereby entering the wastewater network. This can in turn lead to the municipality having to pump water unnecessarily to the treatment plant which is an expensive process

Solution: 

Installing a check valve in the upstream chamber would not have been an optimal solution considering the design of the chamber. Nor would installing a check valve at the outfall of the pipe have been a good solution since the end of the outlet lies underwater.

Instead, Wapro’s technical salespersons and engineers designed a customized solution together with the client. By removing the crown of the concrete pipe, it was possible to install a WaStop DN1200 with a half flange on the inlet side of the valve by bolting it inside the concrete pipe. With a unique pulsating flow mechanism every time the membrane is opened, the WaStop check valve minimises the risk of anything getting stuck between the membrane and the pipe. The end result is an effectively sealed check valve that will prevent backflow for many years.

Wapro-Inline-check-valve-sweden-prevent-high-water-levels-backflow-with-WaStop
Wapro-solution-Inline-check-valve-sweden-prevent-high-water-levels-backflow-with-WaStop
Wapro-Inline-check-valve-installation-sweden-prevent-high-water-levels-backflow-with-WaStop.

PREVENT HIGH WATER LEVELS BACKFLOW WITH WASTOP

Location: Västervik, Sweden

Client: Västervik Miljö & Energi

 

Problem: After a meeting with Västervik Miljö & Energi, the body in charge of the municipality’s water and sewer services, an inspection of the municipality’s overflow system was carried out. The purpose of the inspection was to identify which overflow outlets needed to have a check valve installed as a preventive measure in order to stop backflow into the pipes which can occur, for example, at high water levels. 

One of the overflow outlets that needed to have a check valve installed was a DN1200 concrete pipe leading to an upstream overflow chamber. Two separate pipes lead to the overflow chamber: one for rainwater and one for wastewater with a separating wall in between them. In order to protect the wastewater pipe from overload, wastewater is able to flow over the separating wall and out through the emergency overflow.

However, if water levels are high, this function will make it possible for sea water to flow back through the emergency overflow, thereby entering the wastewater network. This can in turn lead to the municipality having to pump water unnecessarily to the treatment plant which is an expensive process.

 

Solution: Installing a check valve in the upstream chamber would not have been an optimal solution considering the design of the chamber. Nor would installing a check valve at the outfall of the pipe have been a good solution since the end of the outlet lies underwater.

Instead, Wapro’s technical salespersons and engineers designed a customized solution together with the client. By removing the crown of the concrete pipe, it was possible to install a WaStop DN1200 with a half flange on the inlet side of the valve by bolting it inside the concrete pipe. With a unique pulsating flow mechanism every time the membrane is opened, the WaStop check valve minimizes the risk of anything getting stuck between the membrane and the pipe. The end result is an effectively sealed check valve that will prevent backflow for many years.

Acquire the -file.

Please enter your e-mail to a download the file for .dwg.
Please provide your e-mail and location to view the drawing for .pdf.
Your -file is ready for download

Processing your request

Processing your request

Please wait while we prepare your download.
Please wait while we prepare your file in a new tab

Download has started

is available

Your download for the file .dwg has started.
Your drawing for .pdf has been opened in a new tab.
Ok
randomness