Reference

WaReg to newly built residential area

In the middle of central Halmstad, an old and worn-out industrial area, Lundgrens Gjuteri, is being transformed into a modern residential environment in three blocks with varying buildings – Lundgrens Trädgårdar. From a stormwater perspective, the project is a challenge as the buildings are relatively dense and scattered in an environment where all surrounding areas are developed. This means that the stormwater must be led to an existing system with too low capacity.

The solution

The solution was to build 4 concrete pipe reservoirs located under parking spaces in the area. To ensure that the correct amount of water is released from the reservoirs, Wapro's WaReg was chosen. The flow regulators are not dependent on a certain pressure but release the set flow immediately when the reservoirs begin to fill. This makes the reservoirs more efficient as they take longer to fill compared to reservoirs with flow regulators that depend on a certain pressure to release the desired amount of water.

  • Area of ​​use

    Flow regulation

    Backflow in piping systems can cause major problems both downstream and upstream in the form of flooding and overload. The more specific reasons for regulating a flow can vary, and call for different solutions.

For more information

Share this content

FAQ

We have collected frequently asked questions and answers here.

Areas of application

Solutions for all contexts